How to do the daily maintenance of CNC rebar bending center?

1. Please disconnect the power and turn off the power switch before leaving.

2. Clean up the machinery and equipment on time to ensure the cleanliness of the equipment.

3. Lubricating oil must be added regularly to the parts that need lubrication.

4. When dismantling the cutter or repairing mechanical equipment, please disconnect the power supply and hang the maintenance card to ensure safety.

5. Please carefully check whether each part of the machine is normal before starting the CNC steel bar bending center, whether the connecting bolts are fastened reliably, and whether there is leakage in the air pipe. In addition, it is necessary to pay attention to whether the tightening bolts of each part should be checked regularly with a wrench. loose.

6. Always check the lubrication part of the bending center of the steel bar for blockage. If the bending center of the CNC steel bar is not used for a long time, the sliding part should be coated with anti-rust. Under normal circumstances, no matter what kind of construction is done, the construction objects need to be cleaned before the actual operation. Before bending the rebar, it is also necessary to ensure that the surface of the rebar is clean.