Correct operation of rebar cutter to improve the efficiency of rebar cutting

1. No sundries or materials can be placed on the cutting machine to prevent the vibration generated during the operation of the machine from causing objects to fall into the machine. After feeding the steel bar into the pressing roller, you should immediately release your hands and keep a certain distance from the machine. Do not wear gloves during operation to avoid accidents.

2. Straightening is to straighten the steel bars through the upper and lower rows of pressing rollers. If the straightening effect of the steel bars cannot be achieved, you can adjust the offset of the pressing rollers by adjusting the upper adjusting rollers until the straightened Reinforcement can achieve satisfactory results.

3. After processing a certain number of steel bars, measure whether the length is correct, and adjust appropriately if there is any deviation. The current steel bar straightening and cutting machine adopts digital control, and the cutting length can be said to be zero error.

4. Maintenance is also the focus of use. Good maintenance can keep the machine in good accuracy and running state for a long time. Therefore, we should regularly carry out related maintenance on the machine.