Precautions For Rebar Bending Machine

1. During operation, insert one end of the steel bar that needs to be bent into the fixed gap of the turntable, and fix the other end against the machine body and press it by hand. Check the fixation of the machine body and make sure that it is on the side that blocks the steel bar before starting.

2. During the operation, it is strictly forbidden to replace the mandrel, change the angle and adjust the speed, and do not refuel or remove it.

3. When bending steel bars, it is strictly forbidden to process more than the diameter, number and mechanical speed of steel bars specified by the machine.

4. When bending high-hardness or low-alloy steel bars, the maximum limit diameter should be changed according to the mechanical nameplate, and the corresponding core should be replaced.