Problems that occur in the use of rebar bender

◆ Motor failure

If you can't turn on the machine, you can't run correctly, or you can't find the motor jitter, there's no response, or it suddenly stops after turning on. There are two similar situations. There are two processing and reasoning methods, replace the motor, or use a professional test tool. Then check whether the transmission parts are stuck when the steel rolling machine is working.

◆Operation system failure

The steel bar bending machine can operate normally, but the processing accuracy cannot be guaranteed. There are often deviations. For this, we can habitually check whether the running parts are loose. Sometimes there will be abnormal noises from the left and right turn keys, or they cannot be classified in the normal way. It is very likely that the parts are loose or damaged. During the halving process, if the shearing machine equipment often fails to cut effectively, this requires Understand whether the stroke limit switch easy eccentric wheel and other equipment set by the shearing machine can operate normally.