Chengdu Jiutian Machinery Technology Co., Ltd

What Are The Main Points Of Maintaining The Rebar Cutter?

First, before the equipment is used, it is necessary to check whether all the tools are installed reliably, whether there are foreign objects in each traditional system and the parts that need to be moved? If there is, it should be cleaned in time to avoid damage to the tools during the test;

The second is to check the direct clearance of the tool. According to the specification, this gap is between 0.5 and one millimeter. If the gap is too large, it will cause burrs on the surface of the processed steel bars;

Third, when using the cutting machine to cut the steel bar, the operator should pay attention to only hold the steel bar with the left hand, so as to prevent the broken steel bar from jumping out and hurting people.

steel bar cutter GQ40

After the work is completed every day, it is necessary to develop the habit of cleaning the cutting tool in time. It is necessary to remind the operator that the winter cutting machine uses ZG-2 lubricating oil. This type of lubricating oil is thinner and more suitable for winter use. In summer, it is best to use ZG-4 grease. This type of lubricating oil is more viscous and more suitable for summer use.


You Might Also Like

Send Inquiry